Factory layout design consultants

Design Your Factory for Flow. Build It for Performance.

Transform your manufacturing facility into a high-performance operating system with our proprietary Lean Facility Design© (LFD) framework.

Factory layout planning and plant layout design for new manufacturing plants, expansions and re-layouts.

40%
Space optimized
30%
Movement cut
42%
Throughput
40%
Productivity
  • 300+ robust LFD© checkpoints
  • 150+ point sustainable building module
  • A quality management framework on every project
  • World’s first AI-enabled Digital Value Stream Mapping software
₹5,000 Cr+ ≈ USD 500M+
Investment supported yearly
15+
Countries
400+
Clients
50+
Sectors

Trusted by manufacturing leaders for industrial plant layout

  • Curtiss-Wright
  • Tufropes
  • Goldi Solar
  • INOXCVA
  • Suhana
  • TEAL (A Tata Enterprise)
  • Polytex
  • Freudenberg Filtration Technologies
  • Packem Umasree
  • Kineco
  • Wipro Water
  • Remsons Industries
  • Mahavir
  • 260 Brands
  • TAKRAF
  • RR Parkon
  • Abra
  • Oasis Fine Bone China
  • ACE Designers
  • Anadrone
  • RGK Group of Industries
  • Uniflow
  • MTC Industries
  • Mitsu
  • Isinya Feeds
  • Cortland International
  • Kelegent
  • Biso na Biso Groupe
  • Africa PVC Industries
  • Rhodenium
  • Kothari Group
  • Rishab Industries
  • Crompton
  • Strongpak
  • Apollo
  • BRW
  • TORQ Specialty Lubricants
  • Systa Met India
  • Techno Industries
  • Rivoltech Auto Engineering
  • Al-Sharq

Where most factory layouts quietly bleed money

Over 30% of operating cost is locked inside avoidable movement, congestion and rework. It is invisible on the P&L, but visible on the shop floor.

30%

Productivity loss

Material crisscrosses the plant instead of moving in a straight line.

40%

Excess floor area

Operators and forklifts cover kilometers every day, most of it waste.

4×

Excess inventory

Raw material, WIP and finished goods hidden across the shop floor.

25%

Longer lead times

Delays that come from prolonged process lead times.

50%

Lower production

Capacity nobody mapped before the lines were laid.

₹10–50 Cr

Blocked CapEx and OpEx

Locked in extra machines, material handling equipment and warehouse space.

Your factory layout is a business decision.

Book my free layout review

Estimate your factory layout space and CapEx recovery

Move the sliders to see the floor space and CapEx a better factory plant layout could recover, based on benchmarks from 100+ layout transformations.

50,000 sq ft
10,0005,00,000 sq ft
₹25 Cr
₹2 Cr₹200 Cr

Direct CapEx & footprint savings

₹2.0 Cr – ₹3.5 Cr

~11,000 sq ft
Floor space recovered
35–45%
Travel distance cut
Book my free layout review

Indicative only. Actual results depend on your products, processes and site.

Lean Facility Design© The journey to your factory of the future

Faber Infinite’s copyrighted, 15-step framework for designing high-performance, future-ready manufacturing facilities.

Phase 1Understand the flow

  1. Conduct a project kick-off session to align all stakeholders and the project team on the project objectives, scope, execution methodology and expected deliverables. This builds a shared understanding of the LFD© framework and lays the foundation for successful execution. It also works as a capacity-building and training exercise for your team, so you can take up similar projects internally for future expansions.

  2. Analyze the product mix, manufacturing processes, production volumes and future demand to establish the design basis for an optimized, lean and scalable manufacturing facility, from every key business angle.

  3. Identify the end-to-end material and process flow, from raw material receipt to finished goods dispatch, for the future-state design, using the world’s first AI-enabled Digital Value Stream Mapping software.

  4. Develop current-state and future-state value stream maps to identify process inefficiencies, bottlenecks and improvement opportunities (ECRS, conceptual automation recommendations, make-or-buy decisions and more), enabling the design of an optimized lean production system.

  5. Design an optimized material and production flow that ensures smooth movement of materials, minimizes handling and travel distances, and maximizes operational efficiency across the facility, covering material flow, manpower movement and information flow.

Phase 2Plan capacity and resources

  1. Determine the required production capacity, resource requirements and a phased ramp-up strategy to meet current demand while keeping the plant scalable for future growth.

  2. Define equipment requirements from the capacity analysis, with placement guidelines and utility considerations, to ensure optimal machine utilization, efficient workflow and readiness for future expansion.

  3. Establish manpower requirements (station-wise, shift-wise and skill-wise) and deployment strategies based on production demand, process flow and ergonomic principles, to maximize productivity and operational efficiency.

  4. Design an integrated supply chain and inventory management system for raw materials, WIP and finished goods, ensuring material availability, optimized storage and uninterrupted production.

Phase 3Design and roll out

  1. Design optimized supermarkets and line-side storage for uninterrupted material availability, lower inventory, minimal handling and efficient replenishment at each production stage. Includes conceptual design of ergonomic workstations, packing stations and inspection stations.

  2. Develop a conceptual material handling system by selecting suitable handling equipment and defining efficient movement paths, for safe and cost-effective material flow throughout the facility.

  3. Develop an optimized lean facility layout with efficient machine placement, streamlined material flow, optimum space use and provision for future expansion. At least two to-scale layout options are developed and evaluated by a systematic method of elimination, and a physical scale model supports stakeholder brainstorming and decisions. The final layout is selected on transportation index, material handling touchpoints, process flow, space utilization, statutory and safety requirements, customer-specific needs, existing constraints, utilities and implementation feasibility.

  4. Develop visual management guidelines, including signage, floor markings, display boards and identification systems, to improve workplace organization, safety, communication and operational control.

  5. Identify potential operational, safety and process risks and recommend mitigation measures for safe, reliable and uninterrupted operations. A risk mitigation exercise across people, place, process, policy and safety produces a clear countermeasure plan.

  6. Develop a phased implementation roadmap with key activities, timelines, responsibilities and milestones, for smooth and timely execution of the facility design.

Step 12 of 15

Layout design

Develop an optimized lean facility layout with efficient machine placement, streamlined material flow, optimum space use and provision for future expansion. At least two to-scale layout options are developed and evaluated by a systematic method of elimination, and a physical scale model supports stakeholder brainstorming and decisions. The final layout is selected on transportation index, material handling touchpoints, process flow, space utilization, statutory and safety requirements, customer-specific needs, existing constraints, utilities and implementation feasibility.

Built on four pillars

Industrial engineering

Productivity improvement, work measurement, line balancing, capacity, transportation index and spaghetti analysis.

Lean management/OPEX

Lean manufacturing plant layouts with smooth material flow, better efficiency and less operational waste.

Project management

Strategic planning and disciplined execution of complex layout transformation projects.

Sustainability practices

A sustainable building module and practices that reduce environmental impact.

Supporting organizations to design the best-in-class factory layout.

Book my free layout review

Measurable outcomes, engineered from day one

Typical ranges across our plant layout design projects.

~30–50%
Productivity improvement
~15–25%
Manpower optimization
~20–40%
Space optimization
~25–45%
Lead time reduction
Up to 65%
Movement reduction
~30–45%
Inventory reduction
~2–3×
Throughput enhancement
~53%
Material velocity ratio enhancement

Real Client Stories

What Our Clients Have to Say

Hear directly from manufacturing leaders on how LFD© transformed their plant throughput, workflow, and footprint.

What industry leaders say about the LFD© framework

40% less throughput time

“Faber Infinite helped us achieve a 40% reduction in throughput time, 16% manpower savings and 31% productivity improvement through a structured Lean Facility Design© approach.”
Techno IndustriesJayesh ChaudharyCOOTechno Industries Pvt. Ltd. (Lloyds Engineering)

44% manpower productivity

“While we already knew what needed to be improved, they introduced and implemented the right methods, resulting in a 44% improvement in manpower productivity.”
INOXCVADeepak AcharyaCEOInox India Limited (INOXCVA)

42% productivity

“Faber has been a partner in the transformation journey, delivering a phenomenal 42% productivity improvement.”
StrongpakRuben G.S.Country HeadStrongpak Limited

33% production

“We can see the difference of 33% production improvement and we are very happy working with team Faber. They have always worked as being a part of Umasree Texplast.”
Umasree TexplastManish JainDirectorUmasree Texplast Pvt. Ltd.

32% manpower productivity

“Team Faber has helped us improve manpower productivity by 32%, reduced shop floor WIP, reduce overall throughput time and many more through LFD©.”
Apollo Heat ExchangersYash ShahDirector & CEOApollo Heat Exchangers Pvt. Ltd.

15% productivity

“Team Faber has helped us achieve phenomenal results through layout design, delivering a 15% improvement in productivity by designing the ergonomic workstations.”
CromptonSanjay KhanvilkarHead Quality & Business ExcellenceCrompton Greaves

1–3 of 6

Free factory planning and design guide

Don’t build your next factory until you read this.

Six checklists that protect you from the costly design mistakes most manufacturers only discover after the concrete has been poured.

Inside the guide

  1. The pre-design reality check
  2. Flow & layout checklist
  3. Capacity, manpower & ramp-up
  4. Warehouse & inventory design
  5. Safety, visual management & ergonomics
  6. Execution readiness & day-zero launch

Bonus: the 60-second factory readiness self-score.

Get the free guide

12 pages · PDF · instant download

What our plant layout design services cover

From the manufacturing factory floor plan layout to warehouse layout optimization: what we design, and what you take away.

  • Factory plant layout design, from block layout to detailed 2D drawings and 3D models
  • Streamlining the manufacturing flow, from raw material to finished-goods delivery
  • Inventory design for raw materials, WIP and finished goods
  • Design of material handling systems within the factory
  • Warehouse layout optimization for stores, raw material and finished goods
  • Workforce capacity planning and optimization
  • Capacity analysis and future ramp-up plans

Optimized factory layout plan

Block and detailed layouts, with several options scored against engineered criteria.

Movement & flow optimization

Spaghetti reduction, transportation index improvement and line-balancing logic, built into the layout design for your manufacturing plant.

Sensitivity analysis & visualization

Immersive designs of the future state, for buy-in and validation.

Implementation roadmap

A phased rollout plan with owners, gates, KPIs and risk mitigations.

Scalable capacity plan

A capacity model tied to demand scenarios and cost optimization.

Future-ready expansion plan

Brownfield-to-greenfield phasing logic so the plant grows without rework.

Why Faber Infinite

Factory design consultants who implement

As manufacturing plant consultants, we call ourselves implementers, not boardroom advisers. Every engagement is run by a senior team that stays with you from the first workshop to rollout.

Client engagement advisor
30+ years of experience
Business head
~20 years of experience
Client engagement manager
10+ years of experience

Our manufacturing plant consultants work with your transformation steering committee and execution team, backed by our delivery team, quality assurance, a body of knowledge from 400+ clients and our business alliances.

Offices in India

Ahmedabad · Pune · Vadodara

Representative offices

Dubai · Dammam · Nairobi · Lusaka

Beyond the industrial layout: our peripheral offerings

3D walkthrough video, simulation models for flow and operational validation, automation conceptualization and implementation support, ESG guidelines integration, architectural planning and site development, structural engineering, electrical systems, plumbing and drainage, HVAC, fire protection and detection, air, gas and water systems, STP and ETP systems, landscaping, storage and MHEs, machine shifting and MEP integration, PMC support, end-to-end implementation support, governance framework, post-audit support and green building design.

Offered on request; scope agreed per project.

Questions factory owners ask us

What is Lean Facility Design©?

LFD© is Faber Infinite’s copyrighted framework for designing efficient factory layouts. It runs in 15 steps across three phases: understanding the product, process and value stream; planning capacity, equipment, manpower and the supply chain; and then designing the layout, material handling, visual management, risk assessment and rollout plan. It is built on four pillars: industrial engineering, lean management/OPEX, project management and sustainability practices.

How is a lean factory design layout different from a conventional plant layout?

A conventional layout often starts with the building and fits machines into it. A lean factory design layout starts from the flow: in the LFD© framework, layout design is step 12 of 15. Before it, we analyze your products, processes and quantities, map the current and future value stream, and plan capacity, equipment, manpower and supply chain. The layout is then designed around that flow and checked against 300+ LFD© checkpoints.

Which kinds of projects do you take on?

New greenfield plants that need a layout plan of the factory from scratch, brownfield expansions, plant relocations, plant consolidation and re-layouts of an existing manufacturing plant layout. The framework is the same; the scope is adjusted to the stage of your project.

What results can we expect?

Typical ranges on our lean manufacturing plant layout projects are 30–50% productivity improvement, 15–25% manpower optimization, 20–40% space optimization, 25–45% lead time reduction, up to 65% less movement, 30–45% less inventory and 2–3× throughput. The actual figures depend on your starting point, which is what the first conversation is for.

What do your plant layout design services deliver?

Depending on the engagement level: value stream maps, flow and line-side design, capacity, manpower and equipment plans, factory plant layout design options, ergonomic and safety guidelines, visual factory standards, 2D AutoCAD drawings of the manufacturing factory floor plan layout, 3D modeling, a detailed implementation roadmap, documentation and knowledge transfer. We agree the exact scope with you after understanding your plant.

Can you also support civil, MEP and the move itself?

Yes, as peripheral offerings agreed per project. These include architectural planning, structural engineering, electrical, HVAC, fire protection, plumbing, STP/ETP, machine shifting and MEP integration, PMC support, 3D walkthrough videos, simulation models and end-to-end implementation support.

What does a factory layout designer do?

A factory design consultant plans how machines, people, material and storage are arranged in a manufacturing plant so that product flows with the least movement, inventory and wasted space. At Faber Infinite this follows the 15-step LFD© framework: we study your products, processes and volumes, map the value stream, plan capacity, equipment, manpower and supply chain, and only then prepare the factory layout plan, validated with to-scale options, a scale model and a rollout plan.

Do you design industrial plant layouts as well as manufacturing factory layouts?

Yes. The LFD© framework is used for manufacturing factory plant layouts and industrial plant layouts across 50+ sectors. Every industrial layout is designed around product flow, material handling, utilities and safety, and checked against 300+ LFD© checkpoints.

Can you prepare a layout plan for a factory that is not built yet?

Yes, and that is the best time to do it. For a new plant we prepare the layout plan of the factory before the building design is frozen, so the building is planned around the flow, not the other way round. Layout design for a manufacturing plant costs the least to change at this stage.

Do you also do warehouse layout optimization?

Yes. Warehouse (stores) space optimization and planning is part of a typical LFD© project, together with inventory design for raw materials, WIP and finished goods, flow supermarkets and line-side storage, and the design of material handling systems within the factory.

Where do you work?

Across Asia Pacific, Africa and the Middle East. Our offices in India are in Ahmedabad, Pune and Vadodara, with representative offices in Dubai, Dammam, Nairobi and Lusaka. We have worked with 400+ clients in 15+ countries and 50+ sectors.

Planning a new plant, an expansion or a re-layout?

Talk to a senior factory layout designer before the drawings are frozen. That is when a better layout costs the least.

Book my free layout review

Call+91 265 4050889+91 97249 66299

WhatsAppChat on WhatsApp

Emailconsulting@faberinfinite.com

Weblfd.faberinfinite.com

ServingAsia Pacific · Africa · Middle East

WhatsApp usBook free review
Top